Follow Brad Rodriguez with straightforward tips on how to redo and upgrade your bathroom so you don’t need to hire bathroom remodeling services. This video explains how to remove and replace all fittings and fixtures. He shows you a step by step guide on how to give your bathroom a complete makeover.
Removing the fixtures can be pretty easy as most are connected with a few screws and glue. The shower or tub might be more challenging as there are so many different hardware components to remove.
Also, make sure to disconnect your plumbing before removing taps, etc.
Using a piece of plywood to mark out your measurements will make the job a bit easier once you install the drywalling. As you start removing the drywall, always check for any wiring or pipes. Make sure to wear a dust mask once you start removing the fibreglass, as it can become quite a dusty job when cutting into this.
Ensure you mark out all your drywalling first, indicating the screw positions and fixing any defects before applying the glue and screws. Using your waterproofing sealer, go over each corner of your tub or shower area to ensure that you won’t have any water damage problems later on.
Add new tiles, a toilet, and a washbasin, and you are good to go!